Tele-communications

Crossover Clamp (Sujetador en cruz)

Hardware used for cross the messengers, avoiding any hit or[...] See more
 Crossover Clamp (Sujetador en cruz)

Support Clamps Q Hooks (Gancho tipo Q)

Hardware that is fastened to the messenger cable and allows hooking up the tensors for the coaxial cable between the[...] See more
 Support Clamps Q Hooks (Gancho tipo Q)

IDC Block Pair to Subscriber

Insulation Resistance: 10,000 M Ohm Min. Contact Resistance: 5 m Ohm maximun Standard ICONTEC: NTC 3605 Dielectric strength: 3000 V rms, 60 Hz / 60 sec Cable rush line (center): Twisted Cable black colored Conductor diameter: Ø 0643 to Ø 1.02 (AWG 22 - 18), up to 3 mm jacket Inside Line subscriber (Output): white duplex cable Diameter of conductor: 0.4 to Ø Ø .643 (26-22 AWG) up to 2.4 mm Jacket DESCRIPTION The block of a pair for subscriber is[...] See more
 IDC Block Pair to Subscriber

IDC Modular Double Block Ficho 10, 20, 30, 40, 50 and 100 PS

Insulation Resistance: 10,000 M Ohm Min Contact Resistance: Ohm Maximum 5 m Standard ICONTEC: NTC 3605 Dielectric strength: 3000 V rms, 60 Hz / 60 sec Diameter copper wire network cable: 0.4 to Ø Ø 0.643 (AWG 26 - 22), up to 1.3 mm Jacket Cross Cable: Ø Ø 0.6 to 0.8 (22-20 AWG) up to 2.5 mm[...] See more
 IDC Modular Double Block Ficho 10, 20, 30, 40, 50 and 100 PS

Cabinet of 2000 and 2500 pairs

The distribution cabinets are located at the point of division of a local telephone network and are used to connect the primary to secondary wire through terminal blocks located inside. The cabinets are made of parallelepiped shape, formed by the body, the base frame with guide wire, the door and a security plate. Exist a variety of designs for the cabinets. With a capacity of 1200.1400, 1500, 1800, 2000 and 2500 p Advantages: Thanks to its design provides an adequate[...] See more
 Cabinet of 2000 and 2500 pairs

Modular Boxes Dispersion 20 PS IDC SX V2

The housing consists of a base and a cover gray or black, PS 20-PS for self-extinguishing polycarbonate. The connection modules are made of polycarbonate. IDC Technology on both the network and the subscriber side, phosphor copper contacts nickel - tin. The modules are attached to standard DIN mounting rails 35. The pairs are properly numbered 1-5 / 6-10 allowing for clear identification. Yarnfingers packaging material has soft PVC cable entry that protect the[...] See more
 Modular Boxes Dispersion 20 PS IDC SX V2

Modular Boxes Dispersion 10 PS IDC SX V2

The housing consists of a base and a cover gray or black, for the 10 made of polyethylene. The connection modules are made of polycarbonate. IDC Technology on both the network and the subscriber side, phosphor copper contacts nickel - tin. The modules are attached to standard DIN mounting rails 35. The pairs are properly numbered 1-5 / 6-10 allowing for clear identification. Yarnfingers packaging material has soft PVC cable entry that protect the inside of the[...] See more
 Modular Boxes Dispersion 10 PS IDC SX V2

Dispersion Box Megane 10 PS IDC SX V2

The boxes are formed by housing, connecting lead and subjection element and grounding. The housing consists of a base and a cover gray or black, made for the 10 PS en polyethylene and the 20 ps in polycarbonate self extinguishable. The connection modules are manufactured en polycarbonate IDC technology both on the side of the network as the commuter's side, with contacts in copper phosphorated Nickel - Tin. The modules are fixed on standard DIN 35 mounting rails. The[...] See more
 Dispersion Box Megane 10 PS IDC SX V2

Dispersion Box de 20 PS IDC PT

The housing consists of a base and a cover gray or black, for 20-PS boxes self-extinguishing polycarbonate. Multipair cable connection is via a pressure tool that runs it without removing the jacket. The double-tab terminal strip is made of thermoplastic PBT reinforced with fiberglass. Dial has numbered tabs 1-5/6 - 10, allowing clear identification of the couple. Yarnfingers packaging material has soft PVC for cable entry and protect the inside of the box. Connect wire[...] See more
 Dispersion Box de 20 PS IDC PT

Dispersion Box 10 PS IDC PT

The housing consists of a base and a cover gray or black, for the 10 made ??of polyethylene and PS. Multipair cable connection is via a pressure tool that runs it without removing the jacket. The double-tab terminal strip is made of thermoplastic PBT reinforced with fiberglass. Dial has numbered tabs 1-5/6 - 10, allowing clear identification of the couple. Yarnfingers packaging material has soft PVC for cable entry and protect the inside of the box. Connect wire with[...] See more
 Dispersion Box 10 PS IDC PT

Dispersion Box 20 ps IDC Double Sheet

Dispersion Box 20 ps IDC Double Sheet Dielectric strength: 3000 V rms, 60 Hz / 60 sec Standard ICONTEC: NTC 3605, 3608 Conductor diameter copper network cable: 0.6 mm Ø0.4 a jacket or 0.6 to O1.2 (AWG 26-22) Cross cable: 0.8 mm Ø0.6 jacket to max. Ø 2.4 to Ø1 (AWG.22[...] See more
 Dispersion Box 20 ps IDC Double Sheet

Dispersion Box 10 ps IDC Double Sheet

Dispersion Box 10 ps IDC Double Sheet Dielectric strength: 3000 V rms, 60 Hz / 60 sec Standard ICONTEC: NTC 3605, 3608 Conductor diameter copper network cable: 0.6 mm Ø0.4 a jacket or 0.6 to O1.2 (AWG 26-22) Cross cable: 0.8 mm Ø0.6 jacket to max. Ø 2.4 to Ø1 (AWG.22[...] See more
 Dispersion Box 10 ps IDC Double Sheet